Algaher S.A

Delta Joint


	Thickness between 16 and 25 mm For concrete and reinforced concrete tubes. Tubes between DN 200 and DN 3000 Usual Deformation between 25% and 45% Usual prelengthening 15% EPDM Rubber Usual Hardness 50 5 IHRD Standard UNE-EN 681-1 Assembly with ANTICORIT TX7R grease.

Joint Selection

a	b	Gap	Gap Tolerance
16	30	*	*
18	33	*	*
20	36	*	*
22	39	*	*
24	42	*	*
26	45	*	*

* Information Request

Minimun Compresion= 25%
Maximum Compresion= 45%
prelengthening = 15%
Development= Information Request

Material
Synthetic Ethylene Propylene Rubber (EPDM) Designed for the watertightness of sewers made for the draining of rain water and wastes. Hardness 50 5 IHRD Rubber designed under the UNE-EN 681-1 standard In case of residual water mixed with wastes such as oil, petrol or fuel, the joints can be manufactured in Acrylonitrile Butadiene Rubber (NBR) Joints can be manufactured using other types of elastomers.

Algaher

- Home Page
- Access / Emplacement
- Contact
- Support
- Customers

Technology

- Technology
- Chemical Compatibility

Products
Catalogue Download 2,5 Mb.
- Concrete Sewers
Connection Joint
Plank Mould Joint
Harpoon
Delta
Double Harpoon
Incorporated IS
Incorporated ISM
Halfway
Toric Joint
Tear

- General Sections

Windows

Glazing
Jambs
Centrals

Bodywork

Group 1

Group 2

General

Group 1.
Group 2.
Group 3

The information, icons, photographs, images, texts, video sequences, with or without sound, and other documents accessible via this Internet site are subject to industrial and/or intellectual property rights .For this reason, any reproduction, representation, adaptation, translation and/or transformation, in whole or in part, or transfer to another site is forbidden.