Double Harpoon




  • Thickness between 30 and 32 mm
  • Designed for great diameter concrete tubes.
  • EPDM Rubbers
  • Usual Hardness 50 5 IHRD
  • Standard UNE-EN 681-1
  • Assembly with ANTICORIT TX7R grease.

Selección de Junta

a1
a2
b
Gap
Tolerancia Gap
30
32
63
*
*
  * Consultar
MinimunCompresion = 25%
Maximun Compresion= 45%
Prelengthening = 15%
Development = Information Request
   

Material
  • Synthetic Ethylene Propylene Rubber (EPDM)
  • Designed for the watertightness of sewers made for the draining of rain water and wastes.
  • Hardness 50 5 IHRD
  • Rubber designed under the UNE-EN 681-1 standard
  • In case of residual water mixed with wastes such as oil, petrol or fuel, the joints can be manufactured in Acrylonitrile Butadiene Rubber (NBR)
  • Joints can be manufactured using other types of elastomers.
  
   
Algaher
- Home Page
- Access / Emplacement
- Contact
- Support
- Customers
Technology
- Technology
- Chemical Compatibility

Products
Catalogue Download 2,5 Mb.
- Concrete Sewers
Connection Joint
Plank Mould Joint
Harpoon
Delta
Double Harpoon
Incorporated IS
Incorporated ISM
Halfway
Toric Joint
Tear

- General Sections
Car Industry
Windows
 

Glazing
Jambs
Centrals
Bodywork
  Group 1
Group 2
General
 

Group 1.
Group 2.
Group 3

 




The information, icons, photographs, images, texts, video sequences, with or without sound, and other documents accessible via this Internet site are subject to industrial and/or intellectual property rights .For this reason, any reproduction, representation, adaptation, translation and/or transformation, in whole or in part, or transfer to another site is forbidden.